LED on receiver flashes
rapidly and quadcopter will
not respond to transmitter
(during binding )
1.Transmitter too near
drone during binding
process
2.Bind switch or button
was not held while
transmitter was powered
on
3.Drone or transmitter is
too close to large metal
object, wireless source
or another transmitter
1. Power off the
transmitter. Move the
transmitter a large
distance from the drone.
Disconnect and reconnect
the flight battery to the
drone. Follow the binding
instructions
2.Power off transmitter
and repeat bind process
3.Move drone and
transmitter to another
location and attempt
binding again
Summary of Contents for S60 FPV
Page 1: ......
Page 2: ...INSTRUCTION MANUAL ...