Change the frequency by pressing the switch on the battery frame to connect with
different FPV display or VR glasses. With one press to change frequency and hold for
2s to choose frequency group.
Video Display
If you want to experience the flight with a FPV display, 32CH 5.8G FPV is recommended.
FPV starts as soon as the drone is turned on, then turn on the display.
Tune the FPV display according to its instructions.
If you want to experience the flight with VR equipment, the 5.8G 32CH goggles are
recommended.
Install and tune the VR equipment according to its instructions.
TROUBLESHOOTING GUIDE
Problem
Possible Cause
Solution
Will not respond to throttle
Throttle too high and /or
throttle trim is too high
Reset controls with the
throttle stick and throttle
trim at the lowest setting
Does not function and
smells burnt after
connecting the flight
battery
Flight battery connected
with the wrong polarity
Replace the 3-in-1 board.
Connect the flight battery
noting proper polarity
Summary of Contents for S60 FPV
Page 1: ......
Page 2: ...INSTRUCTION MANUAL ...