01
1
2
3
4
5
6
7
1
2
3
1
2
GOLDEN EAGLE SYSTEM
FIELD MAINTENANCE
& SCHEDULE
Field-replaceable items are parts that can easily be replaced in the field without requiring special expertise or
tools other than those provided in the Field Spares Kit. Repairs, upgrades, or software updates that cannot be
performed in the field are beyond the scope of this manual, and doing so may void conditions and terms of the
warranty.
FIELD REPLACEABLE ITEMS
MAINTENANCE SCHEDULE
AFTER 10 FLIGHT
HOURS (OR AS
NEEDED)
Clear and format SD Card media
Clean all sensors and the vehicle with a damp cloth and a can of air
Fully discharge all batteries and charge back to full capacity
Verify that the gimbal and camera connectors and securely seated
Update the Golden Eagle and the TAC software
Delete and re-download offline maps to ensure the latest versions
Clear flight logs from the Golden Eagle
AFTER 150 FLIGHTS
(OR AS NEEDED)
Replace propeller assemblies
Replace rotor arm assemblies
Retire battery pack after 150 charge/discharge cycles
ROTOR ARM REPLACEMENT
Damaged or worn rotor arms require the entire assembly to be replaced but can easily be done so in the field.
The arms are prewired with the motor installed, and only need to be locked into place and secured with a
single Torx T8 screw per arm. The Torx T8 screwdriver is included in the Field Repair Kit.
Arms are keyed to the appropriate sockets on the airframe so that CW and CCW arms cannot be inadvert-
ently interchanged.
REPLACEMENT
INSTRUCTIONS
Place the drone on its back on a table or workspace where the antenna
can hang off the edge to prevent being damaged.
Remove the single T8 Torx screw on the motor arm using a T8 Torx
screwdriver.
© 2022 Teal Drones, Inc.
SUP-00005, REV A
