Mirapoint RazorSafe 170, Hardware Manual

Page: 12 / 76

About Your Appliance
12
1
Front-Panel Features and Indicators
Figure 1 Front-Panel Features and Indicators (3.5-Inch Chassis)
Item
Indicator, Button, or
Connector
Icon Description
1 Power-on indicator/
power button The power-on indicator lights when the
appliance power is on.
The power button controls the DC power
supply output to the appliance. When the
appliance bezel is installed, the power
button is not accessible.
Note: When powering on the appliance,
the video monitor can take from several
seconds to over 2 minutes to display an
image, depending on the amount of
memory installed in the appliance.
Caution: Never use the power button to
to power off the appliance.
2 NMI button Used to troubleshoot software and device
driver errors when using certain
operating systems. This button can be
pressed using the end of a paper clip.
Use this button only if directed to do so
by qualified support personnel or by the
AOS release's documentation.
3 Video connector Connects a monitor to the appliance.
4 Hard drive activity
indicator Lights up when the hard drive is in use.
5 Diagnostic indicator
lights (4) The four diagnostic indicator lights
display error codes during system startup.
6 System status
indicator Lights blue during normal
appliance operation.
Lights amber when the appliance needs
attention due to a problem.
1 4 5 7
9 8
3
10
6
2