Miranda NV9606, User Manual

Page: 35 / 90

NV9607 Control Panel • User’s Guide 25
4. Configuration
Button Definitions
Level B, X The button selects a level.
The button definition has one field to configure: the level. (Do not
choose ‘None’ for the level.)
Your panel — configured for limited X-Y mode or single-destination
mode with breakaway — will have multiple level buttons, one for each
level you want the operator to control. The operator selects multiple lev-
els for a breakaway and then presses a source to complete the take.
When all level buttons are deselected , or when all level buttons are
selected, a take is “all-level.” When one or more level buttons are
selected, a take occurs on just those levels.
The operator must select levels before selecting the source
The color of the level buttons reflect the levels of the current destination
in a limited way.
See also the
None/All button, following.
Menu All This button puts the NV9607 panel in menu mode and displays a menu
on the buttons that provides access to a variety of panel functions. With-
out the button, the operator has no access to the menu functions.
By pressing certain buttons, the operator makes menu selections and may
enter data (such as panel ID) or change brightness values. When the
panel is in menu mode, the menu button cycles through the functions of
the menu. See
Menu Mode on page 49.
The button definition has no fields to configure.
Name Set
Toggle All The button toggles the panel between its default name set and the “sys-
tem name” set. One or the other becomes the active name set.
The button definition has no fields to configure.
If the default name set is the system name set, the button would be a
no-op. Therefore configurers should not create a ‘Name Set Toggle’ but-
ton if the default name set is ‘System Names’.
The status, preset, or destination displays use the active name set
—
either the default name set (aliases) or the system name set. However,
that when the panel is displaying aliases, and a device does not have an
alias, the panel displays the system name.
None/All B The button toggles the panel between all levels (of the current destina-
tion) being selected and none of the levels being selected.
The button definition has no fields to configure.
Page Down All The button scrolls the display down one page (either 3 lines or 7 lines
according to the panel’s display configuration).
The button definition has no fields to configure.
Page Up All The button scrolls the display up one page (either 3 lines or 7 lines
according to the panel’s display configuration).
The button definition has no fields to configure.
Type Modes Description