Miranda iMC-Panel-300, Operator'S Manual

Page: 49 / 176

37
iMC-Panel-300
Operator’s Guide (for Imagestore 750s)
Gang Channels
A ‘Gang Channels’ button lets you couple from 2 to 4 channels together for “ganged” channel
operation. When channels are ganged, any action performed on the “main” channel is also
performed on all selected “follower” channels. (Follower channel buttons tally amber; the main
channel button tallies green.)
A ‘Gang Channels’ button is a toggle: press the “gang” button once to enable gang selection and
press the gang button again to disable gang selection, i.e., to return to single-channel operation.
While gang selection is enabled, you can add or remove follower channels, by pressing addi-
tional channel buttons, subject to the limit of 4 channels in the gang.
S When gang selection is enabled, salvos are inhibited.
S You cannot use the channel menu to add or remove follower channels.
Salvo
An iMC-Panel-300 might have one or more salvo buttons. Pressing a salvo button causes an
NV9000 salvo to execute. (This button requires a connected NV9000 router control system.)
S A channel change can also execute a salvo.
S When channel gang selection is enabled, salvos are inhibited.
System Control
There are 11 system control button types that can be present on your iMC-Panel-300:
Panel Lock Auto Off Fade-to-Black Macro Arm PGM DVE Enable
Group Select Audio Lock Fade-to-Silence Fire Macro PST DVE Enable
Kaleido-X Layout
Panel Lock
The panel lock button prevents you (or someone else) from accidentally making changes to the
Imagestore 750 while allowing you see the status of the Imagestore 750.
A panel lock button is a toggle. Press it once to lock the panel. Press it again to unlock the panel.
When the panel is locked:
• The panel lock button is high-tally red.
• All other buttons on the panel are disabled (locked) but their colors and legends remain
unchanged.
When the panel is locked and you press the panel lock button, the panel will become unlocked
and the panel will function normally.
Automation Off
The ‘Automation Off’ button is a toggle that enables or disables control of the currently selected
Imagestore 750 by an automation system. When this button is high-tally red, the currently
selected Imagestore 750 ignores commands from the automation system (if there is one). When
this button is low-tally green, the Imagestore 750 communicates with the automation system
normally.