GUIDE TO INSTALLATION AND OPERATION
IRD-3101 |
27
3.4.12 The Test panel
Use the Color Bars checkbox to turn the Test function ON or
OFF
•
When
checked
, the output signal is replaced by Color
Bars.
•
When
unchecked
, the normal program signal is
present at the output.
•
The icon at the top of the window (second from the
right) shows the status of the color bars.
3.4.13 The Network Settings panel
Settings tab
ETH Port Status
The status of the ethernet link is shown by the icons:
•
Link is down (red)
•
Link is OK (green)
NOTE: This is the equivalent to the green LED on the rear-
panel ETH connector.
ETH Port Direction
Use the pulldown to select the Ethernet port functionality.
Options are:
•
Disabled – not functional
•
Input – receives a transport stream
•
Output – sends transport stream
IP Config
This section displays the current IP settings on the right, and
provides data boxes to enter new values on the left.
IP Address
Mask
static network parameters
Gateway
Figure 3.26 Network Settings panel – Settings tab
Figure 3.25 The Test panel
