GUIDE TO INSTALLATION AND OPERATION
10
| IRD-3101
3.4 Remote control using iControl
The operation of the IRD-3101 may be controlled using Miranda’s iControl system.
•
This manual describes the control panels associated with the IRD-3101 and their use.
•
Please consult the iControl User’s Guide for information about setting up and operating iControl.
In iControl Navigator or iControl Websites, double-click on the IRD-3101 icon to open the control panel.
3.4.1 The iControl graphic interface window
The basic window structure for the IRD-3101 is shown in figure 3.2. The window identification line across the top gives
the card type (IRD-3101) and the slot number where the card installed in its Densité frame.
There are three main sections in the window, identified in figure 3.2:
Section 1.
The Status Icon area shows a series of eleven icons that report the status of some card parameters. The
table shows the various forms that may appear (icons are numbered left to right):
Icon #1 – Manual Card Configuration
(green)
Remote card control activated. The iControl interface can be used to operate the card
(yellow)
Local card control active, The card is being controlled using the Densité frame control
panel, as described in section 3.3. Any changes made using the iControl interface will have
no effect on the card.
Figure 3.2 IRD-3101 iControl graphic interface window
1
2
3
