14
Caution!
Do not overtighten the hose.
1.
Screw the hose onto the outlet of the
shower control (Make sure the hose
washer is fitted).
Note!
If necessary a 9 litre/minute
flow regulator can be fitted under the
hose washer. The flow regulator is
available as an accessory.
2.
Pass the flexible hose through the
hose retaining ring and screw the
remaining end of the hose onto the
handset (Make sure the hose washer
is fitted).
3.
Place the handset in the clamp bracket
assembly.
Handset Installation
12.
Check the slide bar can not be rotated
or vertically moved. If there is
movement remove the slide bar
assembly from the wall. Check the
slide bar support lugs are properly
engaged with the slots in the slide bar
and the supports are pushed fully on to
the slide bar ends. Refit the slide bar
assembly by repeating instructions 9.
to 11.
13.
Follow the instructions in
"Handset
Installation"
and
"Soap Dish
Installation"
below to complete the
fittings installation.
OR
Flow
Regulator
Handset
Hose
Washer
Clamp
Bracket
Assembly
Hose
Retaining
Ring