11
Installing the Shower Fittings
1.
Install the hose retaining ring, clamp bracket
and the slidebar support onto the slidebar.
Note!
Some components may already be
pre-assembled.
2.
Temporary install the wall bracket into the slide
bar support.
Note!
Use the wall bracket as a guide to mark
the position of the screw hole.
3.
Temporary install the slidebar assembly into
the thermostatic mixing valve.
4.
Using the wall bracket as a guide, mark the
position of the bottom fixing hole for the wall
bracket.
Note!
The distance from the top of the
concealing plate to the screw hole on the wall
bracket is 720 mm.
Note
! Use a spirit level to make sure that the
wall bracket is vertical.
Slidebar Support
Clamp Bracket
700 mm Slidebar
Hose Retaining Ring
720 mm
720 T
o
Screw
Hole
Screw
Hole
Screw
Hole
Slidebar Support
Wall Bracket
5.
After marking the position for the wall bracket
remove the slidebar assembly from the
thermostatic mixing valve.
6.
Drill one Ø8 mm fixing hole for the wall
brackets at 720 mm from the top of the
concealing plate, and insert the wall plug.