3
1103014-W2-E
IMPORTANT SAFETY INFORMATION
Warning!
1.
Products manufactured by Mira are safe and without risk provided they are
installed, used and maintained in good working order in accordance with our
instructions and recommendations.
2. When handling or cutting the wall panels, protective equipment should be
worn, P2 Rated Dust Mask, Safety Spectacles Approved to EN 166 and Ear
Protection required when noise levels exceeds 85dBA.
Caution!
1.
Before Installing
r
ead all of these instructions.
2. Follow all warnings, cautions and instructions contained in this guide.
3 When this product has reached the end of its serviceable life, it should be
disposed of in a safe manner, in accordance with current local authority
recycling, or waste disposal policy.
Important!
Carefully unpack and check the size. Check for transit damage and
report any faults immediately to your supplier.
No claims for the above will
be considered after installation
.
INSTALLATION REQUIREMENTS
Installation must be carried out in accordance with these instructions, and must be
conducted by designated, qualified and competent personnel.
1. Panel to be stored upright or flat.
2. Walls must be clean, dry and free from dust and in accordance with adhesive
manufacturers instructions.
3. Before installing the wall panels, make sure that the shower tray or bath is
level.
4. If the panels need cutting or trimming we recommend using a circular saw. The
blade should have a minimum 80 teeth or a jigsaw with a grit edged tungsten
carbide blade (rough).
5. The corner extrusion can accommodate 7 mm of misalignment.
6. We recommended a good quality strong adhesive such as
Evostik Serious
Stuff, Unibond No More Nails
or similar equivalent.
7. We recommend using bathroom quality silicone sealant containing an
anti-microbial additive.
Caution!
Care should be taken to protect wall panel corners from damage.
Caution!
When installing the wall panels, care should be taken not to damage
the shower tray or bath.