9
Diverter and Rigid Riser Assembly
Installation
1.
Fit the diverter onto the mixer outlet and
tighten the M4 x 5 mm grubscrew with a 2 mm
hexagonal key (supplied)
Note!
The diverter must be fitted as illustrated,
with the diverter knob at the right and the outlet
at the back of the mixing valve.
2.
Screw the rigid riser rail together then into the
rigid riser arm.
3.
Locate the rigid riser rail into the diverter
outlet and the rigid riser arm into the securing
bracket, make sure that they are pushed fully
home.
Important!
Align the rigid riser arm with the
securing bracket using the pin. Then, using a
spirit level make sure that the rigid riser rail
is vertical and mark the position of the fixing
holes for the securing bracket on the wall.
Caution! Do not
cut the rigid riser rail.
4.
For solid walls drill the fixing holes for the
securing bracket with a 6 mm drill and insert
the wall plugs (supplied). For other types
of wall structure alternative fixings may be
required (not supplied).
5.
Secure the securing bracket to the wall using
the screws (supplied).
Rigid Riser
Overhead Arm
Rigid Riser
Rail
Securing
Bracket Cover
Securing Bracket
Fixing Screws
Wall Plugs
Spirit Level
Pin
