4
Cleaning
Many household cleaners contain abrasives and
chemical substances, and should not be used for
cleaning plated or plastic fittings.
These finishes should be cleaned with a mild
washing up detergent or soap solution, and then
wiped dry using a soft cloth.
Use your thumb or a soft cloth to wipe any
limescale from the soft nozzles and the front
surface of the showerhead sprayplate.
Important!
The sprayplate
must
be regularly
cleaned to make sure that the showerhead does
not become blocked.
Spray Plate Assembly
1. Use a suitable tool to remove the grommets.
2. Using the 2.5 mm hexagonal wrench (supplied),
remove the screws.
3. Separate the sprayplate assembly into its
individual components.
4. Clean or replace components as necessary.
Note!
Make sure that the seals are located
correctly.
5. Reassemble the components in reverse
order.
Grommet
Screws
Cleaning the Sprayplate Assembly
Replacing the Sprayplate or Seals
Seals
Seals
Use your thumb or a soft cloth
to wipe any limescale from the
soft nozzles
