Connecting the sensor
To correctly perform a spirometry test, observe the following instructions.
Once connected, a blue LED will illuminate in the lower right hand corner to indicate the
Spirolab is charging. The LED indicator will illuminate green once charging is complete.
The Spirolab can be used on mains power supply whilst the battery is being charged
providing that the battery has sufficient charge for it to operate. The battery will continue
to charge even when in use.
Insert a cardboard
mouthpiece or bacterial
filter.
Connect the
MiniFlowmeter to
Spirolab as shown in the
image.
Slide the turbine fully
into position in the
MiniFlowmeter then turn
it clockwise until it clicks
into place.
Getting Started
8
MIR Spirolab (UK version) | User Manual
Summary of Contents for Spirolab
Page 1: ...spirolab UKVersion User Manual...
Page 5: ......
