Preparation for oximetry
Choose a site with a good blood flow that is suitable for the sensor. Insert the finger all
the way into the sensor. Make sure that the under part of the finger completely covers
the detector. If you cannot position the finger properly use a different finger. Position the
sensor so that the cable runs over the back of the hand. This ensures that the light source
stays on the same side as the nails while the detector remains under the finger.
Performing an oximeter test
Select a patient and from the perform test screen tap the “Oximetry” icon in the bottom
right hand corner. The oximetry test screen will appear.
19
Perform Test
MIR Spirolab (UK version) | User Manual
Summary of Contents for Spirolab
Page 1: ...spirolab UKVersion User Manual...
Page 5: ......
