Spirobank II
Rev.1.6
Page 19 of 35
User manual
ICON DESCRIPTION
Male sex patient selection
Female sex patient selection
To access all oximetry test options / To perform an SpO2/BPM test
To access spirometry testing type
to perform a forced vital capacity test FVC/search FVC tests in memory
To perform a slow vital capacity spirometry test VC/ search VC tests in memory
To perform a maximum voluntary ventilation spimetry test MVV/ search MVV tests in memory
To perform a spirometry test with a broncodilator
To check the alarms and alarm thresholds during oximetry testing
To check the alarms and alarm thresholds during oximetry testing when at least one parameter is turned OFF
Enabled alarm waring during oximetry testing
To temporarily disable the alarm
Disabled alarm warning during oximetry testing
To temporarily enable the alarm
2.5
Service menu
To enter the service menu press the key
on the second screen corresponding to the icon
It is also possible to enter in the service menu when the device showa the main screen, pressing the key
and then the key
.
The service menu shows the following list of items:
•
Change date/time
•
LCD settings
•
Bluetooth settings*
•
Select language
•
Delete memory
•
Select standard
•
Select predicted
•
Select turbine
•
Turbine calibration
•
Oximetry setup*
•
Spirometry setup*
•
Date format
•
Unit format
•
Info firmware
* not available in BASIC version
To select the desired voice use the keys
and
, then enter using the key
.
Change date/time
When setting the date and time, the cursor
indicates the data item which is being modified. Use the keys
and
to modify
the data item of interest, move on to the next data item by pressing
. Press
so that the new settings will take effect and to return
to the service menu. To return to the service menu without modifying the item data press
.
LCD settings
Change and set brightness and contrast using
e
keys. It is possible to switch from a parameter to the other using
and
. To return to the service menu press
.
Bluetooth Settings
Once in the menu it is possible to to select the activation mode of the Bluetooth function.
The possible configuration are three:
•
Always OFF
•
On only if spirobank ON
•
ON even if spirobank OFF
Select the desired configuration, then press
.
So as not to make any modifications touch the
icon in the bottom left side
