Spirobank II
Rev.1.6
Page 18 of 35
User manual
Spirobank II does not switch off completely but goes in stand by status with a very low power consumption. Some functions
are ready and the device updates date and hour or to switch on the device using other remote controllers when required. For
this the symbol in use is
corresponding to the stand by status.
2.2
Energy saving
WARNING
When the device is turned on after approximately 1 minute of disuse the display enters energy saving mode thereby
automatically lowering the display contrast level.
If the device remains in disuse for approximately 5 minutes and is not connected to a PC or battery charger; the device will
emit an acoustic warning signal and turn off.
When the device is turned on the battery charge level is shown with the symbol:
This image indicates that the battery pack is fully charged(6 indicators). A drop of the battery pack charge is displayed with a reduction
of the indicators.
2.3
Main screen
On the main screen, the following areas can be accessed :
patient data management area
spirometry area
oximetry area
archive area
archive area (for BASIC version)
Main screen for BASIC version
This screen allows the patient to access more quickly the dedicated functions. For further information please view paragraph 3.6.1.
2.4
Symbols and Icons
The icons used in the various function screens are shown in the following table:
ICON DESCRIPTION
To access the default settings (service menu)
To access patient data from the main display
To perform a new test of a patient recalled from the patient records.
To insert new patient data
To modify patient data.
To display the most recent tests of a patient
To show the last test performed
To access the database of the performed tests.
To access the database of the performed tests (in BASIC version)
To search a test with the date of birth of a patient
To search a test starting from a specific date onwards..(partial database)
To flick through a database from beginning to end and viceversa (complete database)
