3. Getting started
MiRCharge 24V Operating guide (en) 10/2019 - v.2.0 ©Copyright 2019: Mobile Industrial Robots A/S.
11
3.2. Installing and powering up
This section describes how to install and power up MiRCharge 24V.
Before installing
Before installing, please consider the following:
•
Place MiRCharge 24V against a wall on a clean, even and dry floor.
•
Keep the air vents on both sides of the charging station free to avoid overheating.
•
Install MiRCharge 24V on an electric circuit that is protected by a circuit breaker with cur-
rent rating 16 A (EU) / 15 A (US).
•
Make sure there's a suitable wall outlet that supports the necessary power. For national
electric codes, please consult a licensed electrician.
Wall fixing is not required, but if the charging station is moved even a few cen-
timeters, the robot will be unable to dock precisely. We therefore recommend
fixing it.
and
show the parts of MiRCharge 24V relevant for the installation and
powering up.
3.1. Front view of MiRCharge 24V
