7. Getting started
MiR500 EU Pallet Lift Quick Start (en) 12/2020 - v.1.1 ©Copyright 2018-2020: Mobile Industrial Robots A/S.
44
4.
When the robot finishes the shutdown process, the status and the signal lights go off, and
the Power button turns blue.
When you shut down the robot for transportation, service, or repair, the battery must be
disconnected—see your robot's user guide.
7.11 Charging the robot
This section describes how to charge MiR500 EU Pallet Lift using a MiR cable charger.
A MiR cable charger is not part of the MiR500 EU Pallet Lift standard delivery.
Contact your distributor for more information.
The robot is delivered 40-60% charged.
The rear compartment holds the robot’s battery. To access the rear compartment, see
Accessing the internal parts on page 21
To charge MiR500 EU Pallet Lift using the cable charger, connect the cable charger to the
charging interface on the robot in the bottom-left corner.
