Mipex MIPEX-02 1 Series, User Manual

Page: 26 / 38

OPTOSENSE LLC
Design Department
USER MANUAL
SMALL-SIZE EXPLOSIVE GAS MEASURING SENSOR MIPEX-02-
Х-X-X.1 X
File name: ESAT.413347.006 UM v.2.0.docx Revision 2.0 27 August 2015 Page. 26 of 38
THE SOLE PROPERTY OF OPTOSENSE LLC. ANY REPRODUCTION WITHOUT THE WRITTEN PERMISSION OF OPTOSENSE LLC IS PROHIBITED.
Table 7. Structure of F command response
Byte number Byte data Data description
1 0Eh Special character
2-6 Termo Sensor temperature in ADC readings
7 09h Tabulation
8-12 <St> Ratio Us/Uref with temperature index
13 09h Tabulation
14-18 Us Operating signal in ADC readings
19 09h Tabulation
20-24 Uref Reference signal in ADC readings
25 09h Tabulation
26-30 Stz0 Ratio <Stz> with manual zeroing settings (ZERO)
31 09h Tabulation
32-36 Stz Ratio Stz0 with drift compensation algorithm
37 09h Tabulation
38-42 Stzkt Ratio Stz with coefficient of temperature sensitivity
43 09h Tabulation
44-48 Conc Concentration (according to a factory calibration)
49 09h Tabulation
50-54 Conc1 Concentration scaled by user
55 09h Tabulation
56-60 Status Status word (see Table 9)
61 09h Tabulation
62-71 Sn Sensor serial number
70 09h Tabulation
71 ControlSum Checksum based on XOR
72 09h Tabulation
73 0Dh Carriage return
Table 8. Structure of @ and @*X commands
Command @ (40h 0Dh)
response, byte number and data
Command @*x (40 2A x 0D) response, byte number
and data
1 2 1 2 3
Conc1H Conc1L @(40h) Conc1H Conc1L