11
Firmware/APP Update
APP Update
Once there is a new App version released, your mobile system
and the App will send an update notification. Follow the
prompts to update it.
Firmware Update
Firmware update can be achieved through OTA (Over The Air)
Open APP – connect to dash cam – Enter Settings - Firmware
Update,
Then follow the prompt to upgrade.
Troubleshooting
Scenario
Malfunction
symptom
Root cause/Solution
Installation
Image blur
1. Make sure the lens
protector is removed
2. The windshield might
reflects, slightly adjust the
camera angle to avoid
reflection
Day and night
image quality
differs a lot
Normally the window
film’s transparency rate is
between 68%~80%, it will
effect the recording result
Power disconnect
frequently
Due to different car
models, please adjust the
car charger angle to avoid
loosing position
Note:
DO NOT power off the Dash Cam during the update.
The Dash Cam will restart automatically after the firmware is
successfully updated. Please contact us immediately if the
update fails.