SNMP-SSL
15
18. In the SNMP-SSL Configuration Utility Main Menu, select “3” to configure the Access
Control settings. To set up more restrictive access, you can use the access table to
add the IP address of the PC’s on which you wish to modify the access permissions.
Note:
The configuration of Access Control Table is configured for HTTP and SNMP
HTTP Network Management. Access through Telnet or RS-232 is permitted only when
using the “Community Read/Write” password in Control Group. The community strings
entered in the Community String fields are visible only through the RS-232 connection.
The Telnet connection does not display the string. An asterisk “*” will be shown in the
field. If a “NotAccess” access right is associated with an IP address, the associate
workstation will not be able to display any information regarding the SNMP-SSL card,
even if the Community Read-Only string is entered.
Figure 2-18: Access Control Table
After completing these settings, select “0” to return to the SNMP-SSL Configuration Utility
Main Menu.
