Minuteman SMARTSINE, User Manual

Page: 3 / 24

2
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS !
NOTICE:
This equipment has been tested and found to comply
with the limits for a Class B computing device in accordance with the
specifications in Subpart J of Part 15 of FCC Rules and the Class B
limits for radio noise emissions from digital apparatus set out in the
Radio Interference of the Canadian Department of Communications.
These limits are designed to provide reasonable protection against such
interference in a residential installation. This equipment generates and uses
radio frequency and if not installed and used properly, that is, in strict
accordance with the manufacturer's instructions, this equipment may cause
interference to radio and television reception. If this equipment does cause
interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Thank you for purchasing a MINUTEMAN power protection product. It has been
designed and manufactured to provide many years of trouble free service.
Please read the manual before installing your SmartSine UPS. It provides the
information that should be followed during installation and maintenance of the
UPS and the batteries allowing you to correctly set up your system for the
maximum safety and performance. Included is information on customer
support and factory service if it is required. If you experience a problem with the
UPS please refer to the Troubleshooting guide in this manual to correct the
problem or collect enough information so that the MINUTEMAN Technical
Support Department can rapidly assist you.
This symbol indicates "ATTENTION"
This symbol indicates "Risk of Electrical Shock"
English