3
Receiving Inspection
After removing your Minuteman UPS from its carton, it should be inspected for damage that
may have occurred in shipping. Immediately notify the carrier and place of purchase if any
damage is found. Warranty claims for damage caused by the carrier will not be honored.
The packing materials that your UPS was shipped in are carefully designed to minimize any
shipping damage. In the unlikely case that the UPS needs to be returned to Minuteman,
please use the original packing material. Since Minuteman is not responsible for shipping
damage incurred when the system is returned, the original packing material is inexpensive
insurance.
PLEASE SAVE THE PACKING MATERIALS!
TO DE-ENERGIZE THE OUTPUTS OF THE UPS:
1. IF THE UPS IS ON PRESS THE ON/OFF BUTTON FOR 1 SECOND.
2. DISCONNECT THE UPS FROM THE AC POWER OUTLET.
3. TO DE-ENERGIZE THE UPS COMPLETELY, DISCONNECT THE
BATTERY.
(SEE SECTION 6 FOR INSTRUCTIONS)
Para Systems Life Support Policy
! "
#
$ "
% &
' ()
* + ,-$. ' +
,-$. * / + ,-$.
" - #
CAUTION!
TO REDUCE THE RISK OF ELECTRICAL SHOCK IN
CONDITIONS WHERE LOAD EQUIPMENT GROUNDING CANNOT BE
VERIFIED, DISCONNECT THE UPS FROM THE AC POWER OUTLET
BEFORE INSTALLING A COMPUTER INTERFACE CABLE. RECONNECT
THE POWER CORD ONLY AFTER ALL SIGNALING CONNECTIONS ARE
MADE.
CAUTION!
CONNECT THE UPS TO A TWO POLE, THREE WIRE
GROUNDING AC POWER OUTLET. THE RECEPTACLE MUST BE
CONNECTED TO APPROPRIATE BRANCH PROTECTION (CIRCUIT
BREAKER OR FUSE). CONNECTION TO ANY OTHER TYPE OF
RECEPTACLE MAY RESULT IN A SHOCK HAZARD AND VIOLATE LOCAL
ELECTRICAL CODES.
WARNING:
RISK OF ELECTRICAL SHOCK. HAZARDOUS LIVE PARTS
INSIDE THIS POWER SUPPLY ARE ENERGIZED FROM THE BATTERY
EVEN WHEN THE AC INPUT POWER IS DISCONNECTED.
