14
N OT E: 230V Specs Shown in ( )
Pro 700r
Pro 1000r
Pro 1400r
Pro 2200r
Nominal input voltage
115V (230V)
115V (230V)
115V (230V)
115V (230V)
*Acceptable input voltage
92-150 (176-282) 92-150 (176-282) 92-150 (176-282) 92-150 (176-282)
*Output voltage (on-line
operation)
103V-131V
(196V-253V)
103V-131V
(196V-253V)
103V-131V
(196V-253V)
103V-131V
(196V-253V)
Output voltage (Battery
operation)
Nominal voltage
±
5%, -10% after low battery warning.
Simulated sine wave
Nominal input frequency
50 or 60Hz, autosensing
Frequency limits(on-line)
50 or 60 Hz +/- 3 Hz
Frequency (Battery operation)
50 or 60 Hz +/- 1 Hz
Input protection
Resettable circuit breaker
Transfer time
4 ms typical
Maximum load VA/Watts
700VA/450W
1000VA/670W
1400VA/950W
2200VA/1600W
Protection
Overcurrent and short-circuit protected, latching shutdown on overload
Surge energy rating(one time,
10 to 1000 us waveform)
480 Joules
Surge current capability (one
time, 8 to 20 us waveform)
6500 A maximum
Surge response time
0 ns (instantaneous) normal mode, <5ns common mode
Surge voltage let-through
< 0.3 % of peak, typical
Noise filter
Normal and common mode EMI/RFI suppression, 100 kHz to 10 MHz
Battery Type
Hot-swappable, Spill-proof, sealed lead acid, maintenance-free
Typical battery life
3 to 5 years
Typical recharge time
4 hours
10 Base-T surge protection let-
through
<5%
(As a percentage of an applied
±
6kV 1.2/50
µ
s, 500A 8/20
µ
s test)
Telephone line surge protection
let-through
1%
(As a percentage of an applied
±
6kV 1.2/50
µ
s, 500A 8/20
µ
s test)
Operating temperature
0 to +40 degrees C (+32 to 104 degrees F)
Storage temperature
-15 to +45 degrees C (+5 to +113 degrees F)
Operating and storage relative
humidity
0 to 95% non-condensing
Operating elevation
0 to +3000 m (0 to +10,000 ft)
Electromagnetic immunity
IEC 801-2 level IV, 801-4 level IV, 801-5 level III
Audible noise in dbA at 1 meter
< 45
Audible alarm
On Overload, Low battery warning, On battery
Communications port
DB-9 Minuteman standard, optional SNMP
Size (H x W x D)
8.9 X 48.3 X 45.3 cm
(3.5 X 19.0 X 17.8 in)
13.2 X 48.3 X 50.4 cm
(5.2 X 19.0 X 19.8 in)
Weight net (shipping)
19.8 (22.1) Kg
43.6 (48.6) Lb
26.6 (28.9) Kg
58.6 (63.6) Lb
29.7 (32.0) Kg
65.4 (70.4) Lb
46.4 (49.1) Kg
102 (108) Lb
Battery pack
Available on the 2200 only (Pro BP1)
Battery pack size (HxWxD) and
weight
8.9 X 48.3 X 45.3 cm (32.1 Kg)
3.5 X 19.0 X 17.8 in (70.7 Lb)
Conformance
UL 1778, CSA C22.2,
FCC Class A, TUV/GS, CE,
EN50091-1, EN50091-2, EN60950,
EN50082-1, EN55022, EN61000-3-2 & EN61000-3-3
*Note: The input voltage range is adjustable via software. For input voltages less than 8% or more than
12% of nominal, the voltage regulator will boost or reduce the input voltage by 15%.
