Minuteman PowerBoss 3800, Operation Service Parts Care

Page: 4 / 23

2
INSTALLATION INSTRUCTIONS
1. Depress Red Emergency Disconnect Switch on 3800 Rider.
2. Remove Sweep System Plus from pallet (Fig. 1).
3. Remove hitch pins (Fig. 2).
4. Remove corner rollers from 3800 Rider.
5. Roll Sweeper into position at front of 3800 Rider (Fig. 2). (Be sure not to pinch the
electrical cables).
6. Attach Sweeper to 3800 Rider using hitch pins (Fig. 2).
7. Remove Sweeper carts (Fig. 3). Attach carts together and store (Fig. 4).
8. Electrical Connection: Connect power and circular connectors from Sweeper to the
mating connectors under the main machine.
REMOVAL INSTRUCTIONS
1. Turn Sweeper power “on”. When Sweeper is fully down, move switch to neutral position
(see “OPERATION” section).
2. Depress Red Emergency Disconnect Switch on 3800 Rider.
3. Electrical Disconnection: Disconnect power & circular connectors under the main machine.
4. Attach carts to left and right side of machine using (4) bolts provided (Fig. 3).
5. Remove hitch pins.
6. Roll Sweeper away from 3800 Rider.
7. Re-attach corner rollers using hitch pins.