background image

1

IMPORTANT SAFETY INSTRUCTIONS

CAUTION:

 Operators must read and understand this manual before operating or maintaining

this machine.

Keep hands and feet clear of moving parts while machine is in operation.

Disconnect the power to the machine by pressing the red Emergency Disconnect Button when
charging batteries or during installation or removal of pads.

During operation, loose objects on the floor can become dangerous projectiles if struck by the high
speed pad.  Special attention should be paid in removing or avoiding loose floor tile, electrical
cables, telephone connection boxes.

Electrical motors and components can cause an explosion when operated near explosive materials
or vapors.  Do not operate this machine near flammable materials such as solvents, thinners, fuels,
grain dust, etc.

Keep machine moving to reduce the risk of damaging floor finish and floor.

Make sure the red Emergency Disconnect Button is pressed and the battery connector is unplugged
from the machine before performing any maintenance procedures.

Store or park this machine on a level surface only.

These machines are designed for level floor operation only.  

Do not operate on ramps or inclines.

Battery acid can cause burns.  When working on or around batteries, wear protective clothing and
safety glasses.  Remove metal jewelry.  Do not lay tools or metal objects on top of batteries.

Charging batteries generates explosive gases.  DO NOT CHARGE BATTERIES WHEN OPEN
FLAMES OR SPARKS ARE PRESENT. DO NOT SMOKE.  Make sure the charger is turned off
before disconnecting it from the machine.  Charge the batteries in a well-ventilated area with the
battery cover removed completely.

Maintenance and repairs must be performed by authorized personnel.

SAVE THESE INSTRUCTIONS

Summary of Contents for Lumina 20 M26036CE




















Reviews: