Minuteman ERide 21, Service Manual

Page: 54 / 91

CHAPTER 9
DRIVE SYSTEM
The significant maintenance/replacement procedures relating to the
Drive system are described in this chapter.
In addition Troubleshooting is described in the final section.
9.1 PROCEDURE TO CHANGE THE MAXIMUM DRIVE SPEED OF THE 9.1 PROCEDURE TO CHANGE THE MAXIMUM DRIVE SPEED OF THE
MACHINE
WARNING! This procedure can only be performed by the person responsible
for the machine, who must adjust the maximum speed of the machine, taking
into account the experience of the operator to whom the machine is
entrusted, for the washing/drying activity.
The operator is absolutely prohibited from varying the maximum speed of
the machine.
1. Turn the ignition key to "I" while holding down the button (1, Figure 9-1 ) and
wait for the display (2) the setting (3), and then release the button (1).
The value (4) indicates the maximum pre-set speed on the machine. The
maximum speed can be set from a minimum value of 1/5 to a maximum value
of 5/5.
2. Press the button (1) several times until the maximum speed value desired is
set on area (4) of the display.
3. Wait for the machine to reset; the new maximum speed is set.