Minuteman ERide 21, Service Manual

Page: 45 / 91

8.4
DISASSEMBLY/ASSEMBLY OF THE SUCTION MOTOR
Removal Removal
1. If available, place the machine on a lifting platform; otherwise,
place the machine on a level floor. Make sure that the machine
cannot move independently.
2. Operating on the machine's controls as provided for in the User p g p
and Maintenance Manual, lower the brush and the squeegee,
then turn the ignition key to "0" and take it out.
3. Remove the battery holder drum and disconnect the battery
connector (6, Figure 3-4 ) (For the procedure, see the User and
M i t M l) Maintenance Manual).
4. Operating on the left side of the machine, unscrew the screws (1,
Figure 8-4 ).
5. Remove the support unit with the vacuum motor and filter (2),
after you have disconnected the electrical connector (3) of the after you have disconnected the electrical connector (3) of the
vacuum motor.
6. Remove the sound insulating seal from the bench (4).
7. Remove the vacuum motor (5).
Assembly
8. Reassemble, by reversing the sequence of operations performed
for disassembly
.