Page 33
5.8 Cylindrical Brush Deck
1. Brush toothing
2. Dirt hopper
3. Cylindrical brush deck
4. Defl ector Rollers
5. Quick-release
6. Feed inlet
7. Brush seating
8. Locking lever
5.8.1 Clean Dirt Hopper
Clean dirt hopper (Fig. 11/2) at daily intervals or
as required.
Remove dirt hopper from the right machine side
(seen in directin of travel). Use quick-release
(Fig. 11/5) to loosen feed inlet (Fig. 11/6) and
clean dirt hopper.
5.8.2 Remove Brushes
1. Release brush seating (Fig. 11/7) by
locking lever (Fig. 11/8).
2. Remove brush seating by lowering and
removing it to the front.
3. Remove and check the brushes.
5.8.3 Clean Brushes
Clean brushes in the brush deck at daily
intervals or as required.
5.8.4 Fit Brushes
Check brushes in the brush deck for wearing
at weekly intervals and replace as required.
1. Insert brush into brush deck and let it
catch (brush toothing (Fig. 11/1) as to
point to the outside).
2. Place brush seating and lock by lever.
5.8.5 Change Defl ector Roller
Check defl ector rollers (Fig. 11/4) at weekly
intervals and replace if required.
Fig.11
