front cover
3
5
dust bag
air inlet
Store Electrical Cord
6. You will find your cord retainer either at the bottom of the upper cord hook or on
the handle above the upper cord hook. Firmly push the electrical cord down into
either cord retainer. This will place the cord out of the way the next time you
vacuum.
7. Next wind the cord around the two cod hooks on the one side of cleaner. On some
models the upper cord hook turns to release the cord. Turn the hook up to store the
cord.
8. Secure the plug to the cord to prevent unwinding.
6
cord hook
cord hook
7
-4-
Starting the vacuum cleaner
The upright vacuum cleaner design allows use on multiple types of carpeting and on
upholstery or bare floors with attachments.
When using the attachment tools, place
the handle in the upright position. Do not place cleaner on furniture or steps as
the brush roll may cause damage.
1. Adjust cleaner height setting knob to lowest position for maximum cleaning.
Adjust to a higher setting to make pushing easier. For easy adjustments, tilt the
cleaner back to move the setting knob.
2. Plug electrical cord into outlet.
3. Step on handle release. Pull handle back to a comfortable position.
4. Push On or off power switch.
handle release
clean under
store or use attachments
use
handle release
ON/OFF
旋钮
LOW
H
IGH
1
3
dust indicator
2
4
Cleaner Height Setting
Warning: Avoid injury, Keep loose clothing, hair, fingers, and all other parts of body
away from any moving part (such as the revolving brush). Turn off the switch and
unplug the cleaner before changing the cleaner height setting.
The front of the cleaner has an adjustment that raises or lowers the cleaner base to
match the type of carpet. With the cleaner cord unplugged, set the adjustment lowest
setting for maximum cleaning. If the cleaner is difficult to push, move adjustment to
next highest setting until cleaner is comfortable to push. The brush roll must reach the
HOW TO USE
(137003)
Knob
