43
EN
GL
IS
H
TROUBLESHOOTING
Problem
Solution
Camera does not turn on.
Replace all batteries with fresh ones.
(see chapter “Inserting or changing the batteries”)
Camera does not take
photos / record videos.
• Check the batteries and replace them if necessary.
• Reset the camera to factory default.
(see chapter “Settings menu (MENU)”).
• Insert a new memory card.
Night images are too dark.
Check that the power saving mode is set to “ON” and replace the
batteries.
Camera turns off with a
countdown after power is
turned on.
In live mode, the wildlife camera switches off after a short countdown to
enter standby mode. If the motion sensors detect motion, the wildlife
camera automatically switches on and takes pictures in accordance with
the current settings.
Only photos are taken
even though the wildlife
camera is in “Photos &
videos” mode.
Check the “Video length” and “Delay” settings. Reset the camera to
factory default if necessary.
Forgot camera password.
Contact the MINOX customer service.
“Batt. low” is displayed.
The batteries are low on power and must be exchanged.
Photos without animals.
Make sure that there are no branches or other objects in the motion
sensor's detection range that could trigger unwanted images due to
movement.
Overexposed night
images.
Make sure that the camera is mounted at spot where it cannot be
influenced by reflecting signs, windows or similar.
WiFi connection of the
wildlife camera does not
connect to your mobile
device.
Check if your mobile device meets the minimum requirements of iOS 10
or newer, or Android 4.4 or newer. Smartphones with Android must have
Bluetooth LE support.
Static discharge may
cause the device to no
longer function as desired.
In this case, please switch off the device and switch it on again after
about 10 seconds. The device should now function as it should.
Summary of Contents for BTC 550 WiFi
