background image

indoor bicycle trainer

 

MAGTEQS TWIN

instructions manual

For More Information

MINOURA U.S.A.   

 

 

 

 

MINOURA JAPAN

(for U.S. residents ONLY)  

 

 

 

(for ALL customers)

1996 East Ave. Hayward, California 94541 U.S.A.   

1197-1 Godo, Anpachi, Gifu 503-2305 Japan

Phone: 1-510-538-8599 

 

 

 

 

Phone: +81-584-27-3131

Fax:  1-510-538-5899 

 

 

 

 

Fax:   +81-584-27-7505

Email:  [email protected]   

 

 

Email:  [email protected]

 

 

 

 

 

 

 

 

Web:   www. minoura.jp

Made in Japan

If you need help, please contact the shop where you originally purchased this 

product or the distributor in your country first. The distributors list can be found 
on our web site. If you don't get enough assistance, you can contact us;

(version 1.1E 2010/10)

Applicable Tire Size Capacity

  • 

Without Z-adaptor  26 x 1.50

700 x 40c

  • 

With Z-adaptor 

22 x 1-3/8

26 x 1.25

Quick Release Hub Clamp

Mounts/dismounts your bike in 
seconds.

Micro-Adjustable Legs

By turning the dial, the 
legs can be ad/- 
10 mm to accommodate 
uneven surfaces for 
complete trainer stability.

Tubular U-shape Leg

Not just for unique design, but 
reduces weight and provides 
great stability.

Bolt Type Left Side Coupling

Fits 120 – 145 mm standard hub 
width. For quick release type hub 

only. For fixed nut hub, replace 

to the optional "Longer Left Side 
Coupling Bolt" (SKU:400-1285-00).

U-Leg Hole for Smaller Wheel

Use this hole for all 24", 26", and 
650c wheels to keep the bike 
horizontal.

Tandem Magnet Type Unit

A world's first. Primary magnet is 
engaged for the first 7 levels then 

the second magnet kicks in for 
the next 6 levels.
Gives you the widest range of 
resistance of any trainer.

Foot Pedal

Engage, release and adjust 
tire contact in one action.
Remembers location so if 
you use the same bike, no 
new set up is needed.

Lighter Flywheel = More Power

Our patented flywheel weighs less for 

greater portability but performs as well as 

a flywheel weighing 35% more. The key 

is the inside stair-step design for perfect 
power transmission when you need it.

Summary of Contents for TWIN - V1.1E









Reviews: