Minolta MNCD410T, User Manual

Page: 16 / 34

15
4.1.2 Loop Recording
This setting allows you to set a maximum duration for each video clip recorded. Once you
select an option, your camcorder will record video clips in this time interval only. Once your
selected duration recording time is reached, the camcorder will end the recording and begin
recording a new video file seamlessly. Once your inserted memory card has reached its
maximum storage capacity, the dashcam will begin deleting the oldest recordings to make
room for new recordings*.
1. In VIDEO mode, press and hold the MENU button to access the menu. Select
by using the UP or DOWN buttons. Press the OK button to enter the
submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off , 1 Minute, and 3 Minutes.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
*NOTE: Locked files will not be deleted or overwritten. To manually delete locked files,
follow the instructions in section 4.3
4.1.3 High Dynamic Range
This setting allows you to turn High Dynamic Range on and off. HDR improves the range of
color and contrast in a digital image and video.
1. In VIDEO mode, press and hold the MENU button to access the menu. Select High
Dynamic Range by using the UP or DOWN buttons. Press the OK button to enter the
High Dynamic Range submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off and On.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.