)LUVW8VH
2. First Use
2.1 Inserting the Memory Card
Insert the included Micro SD memory card to record and store your videos and
photos. When the battery is low, media stored on the memory card will not be
erased. Please insert the SD memory card by following the steps below:
1. Insert the memory card in the slot on the side of the camcorder. Ensure that
the metal contacts are inserted first. Push the memory card in until you hear
an audible click.
The memory card can only be inserted in one way. Do not force the
card in if it will not go in smoothly.
2. To remove the memory card, simply push in and the card will eject back out.
2.2 Charging the Battery
Connect your camcorder to the included AC adaptor with the USB cable
provided for charging. Insert the small end of the USB plug into the
camcorder
’
s port, and the larger end in to the included AC adaptor. The
status LED will light up Red when charging.
2.3 Powering the Camcorder On/Off
Hold the POWER button for 3 seconds to power the camcorder on. To
power the camcorder off, press and hold the POWER button for a further 3
seconds.
If the
camcorder’s battery is low, a “Low Power” message will display on
the screen and it will automatically shut down within a few seconds to
prevent memory corruption or loss.
NOTE:
x
Please format the memory card before using the camcorder
(Caution, this will erase all data on the card).
x
Do not remove or insert the memory card when recording. It
may damage the card or cause data loss.
x
Memory card rating must be Class 10 or above.
