ϯ͘hƐŝŶŐdŚĞĂŵĐŽƌĚĞƌ
3.4.4 Image Rotation
This option will flip the recorded videos and images 180 degrees.
1. Press the MODE button until you enter the Options Mode.
2. Press the OK button to enter Options mode.
3. Press the MODE button twice to enter Options Setup Mode.
4.
Select ‘
Image Rotation
’
using the UP or DOWN buttons.
5. Press the OK button to turn Image Rotation On or Off, if the box has a
check mark then image rotation is activated.
3.4.5 Driving Mode (Auto-Delete)
This feature will allow you to record video when the memory card is full, the
new recording will overwrite the earliest recording.
The earliest recording
will be deleted and cannot be undone.
1. Press the MODE button until you enter the Options Mode.
2. Press the OK button to enter Options mode.
3. Press the MODE button twice to enter Options Setup Mode.
4.
Select ‘
Driving Mode
’
using the UP or DOWN buttons.
5. Press the OK button to turn Driving Mode On or Off, if the box has a
check mark then auto-delete is activated.
Note: when Driving Mode is activated, the camcorder will automatically
start recording when powered on.
3.4.6 Light Source Frequency (Power Frequency)
This function sets the frequency of the camcorder from 50Hz to 60Hz.
Please check the frequency of your location and set accordingly.
1. Press the MODE button until you enter the Options Mode.
2. Press the OK button to enter Options mode.
3. Press the MODE button twice to enter Options Setup Mode.
4. Select
‘
Light Source Frequency
’
using the UP or DOWN buttons, press
the OK button to enter the
‘
Light Source
Frequency’
submenu.
5. Press the UP or DOWN buttons to select your desired frequency. Then
press the OK button to confirm your selection
(Auto, 50Hz, 60Hz)
. The
default frequency for the United States is 60Hz.
3.4.7 LED Indicator Light
This function allows you to turn the LED Indicator Light on and off.
1. Press the MODE button until you enter the Options Mode.
2. Press the OK button to enter Options mode.
3. Press the MODE button twice to enter Options Setup Mode.
4.
Select ‘
LED Indicator Light
’
using the UP or DOWN buttons.
5. Press the OK button to turn LED Indicator Light On or Off, if the box has a
check mark then the LED Indicator Light is activated.
