Minolta EP2080 Operator'S Manual Download Page 111

Page: 111 / 148

Insert the new Staple Cartridge in the
direction of the arrow until it clicks
into position.

Place a sheet of paper into the 1st Bin
of the Staple Sorter.

Close the Stapler Door and slide the
Staple Sorter back against the copier.

Touch

Staple

The Staple Sorter automatically
test-staples the paper 2 to 3 times.

If no staples are evident, place
another sheet of paper into the 1st
Bin and repeat steps 7, 8, and 9.

Remove the sheet of paper from the 1st
Bin and check that staples have been
driven into it.

•

Replace the Staple Cartridge only after
you are prompted to do that by the
message. Removing the Staple
Cartridge before then will result in
stapling trouble.

•

Immediately after the new Staple
Cartridge has been loaded, be sure to
follow steps 7 to 9.

•

DO NOT turn the green gear near the
cartridge inside the Stapler Unit.

NOTES

r 5

a M

sag

e A

ppea

3. When the Message "The Staple Cartridge is empty." Appears

109

Summary of Contents for EP2080





















































































































































Search results

Summary of Contents for EP2080

Reviews:

Related manuals for EP2080

Brands by name

Popular brands

Minolta EP2080, Operator'S Manual

Search results

Summary of Contents for EP2080

Reviews:

Related manuals for EP2080

Brands by name

Popular brands