Minolta EP1030 User Manual Download Page 72

Page: 72 / 83

left

Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER6.GB Page 64 of 64

Text produced for: User Manual EP1030/1030F first page in draft 41

6.2 Copier Does Not Work Properly

EP1030/1030F

Rev. 1.x/22.05.02

6.2

Copier Does Not Work Properly

If the above steps do not correct the problem with the copier, turn the
Main Switch off, unplug the cord and contact your service
representative.

Problem

Cause

Correction

Nothing
displayed on the
Control Panel.

The Auto Power Off
function has been
activated.

Press the Main Switch to
turn the copier on.

Copying does
not start when
the Start Key is
pressed.

Is the LED in the Start
Key off?

The Copier is still warming
up. Wait a moment.

Is there an error
display (J/E/C) on the
Control Panel?

Take the necessary action
to correct the error
displayed. (See page 40.)

No power to the
copier.

Is the Front Door
closed?

Make sure the Front Door
is securely closed.

Is the copier plugged
in?

Make sure the plug is
securely in the outlet.

Has a breaker in the
power supply gone
off?

Reset the breaker.

Summary of Contents for EP1030




















































































Search results

Summary of Contents for EP1030

Reviews:

Brands by name

Popular brands

Minolta EP1030, User Manual

Search results

Summary of Contents for EP1030

Reviews:

Brands by name

Popular brands