Minolta DYNAX 7, Repair Manual

Page: 42 / 66

42 (2181)
REP
AIR GUIDE
7985-1021-01 7985-1021-01 7985-1021-01 7985-1021-01 7985-1021-01
Preparation before AF adjustment
Note: After replacing CCD MODULE ASSY and/or MIRROR BOX ASSY or its relative parts, always
perform adjustment 1 to 4 (pg. 43-46). If customer says focus fucntion is not normal, perform this
adjustment too.
Preparations
The following items should have been completed before starting AF adjustment.
1. Peform this adjustment without TOP COVER ASSY, after disassembling from step 1 to step 9 in P.4.
2. When CCD sensor module is out of position after replacing CCD MODULE ASSY, tighten three AF
adjusting screws until they stop, then evenly loosen them by 0.4mm (1.14 turns).
Equipment Required
See the list on pg.64-65 for the measuring instruments, tools and jigs.
AF Master Lens
AF Chart I for 2163
AF Chart II for 2163
AF Chart III for 2163
HIT Controller
ROM Pack for 2181
Contact Jig for 2181
Contact Jig Cable
I/F Box for HIT
AF-Y/P Adjuster
AF Tripod Attachment-II
Grip Ring
TORX L-Wrench
Hexagon Bar Wrench (1.5) or Hexagon Screwdriver
Fluorescent (FL40S W-SDL) (EZ check and adjustment)
Flood Lamp (AF Area and Pitch Yaw adjustment)
(color temperature of 2800 degrees K and brightness
higher than or equal to EV 10)
ROM Pack for 2181 ROM Pack for 2181
ROM Pack for 2181 ROM Pack for 2181
ROM Pack for 2181
HIT Controller HIT Controller HIT Controller HIT Controller HIT Controller
AF Master Lens AF Master Lens
AF Master Lens AF Master Lens
AF Master Lens
Yaw Adjusting Plate Yaw Adjusting Plate Yaw Adjusting Plate Yaw Adjusting Plate Yaw Adjusting Plate
Pitch Adjusting Plate Pitch Adjusting Plate Pitch Adjusting Plate Pitch Adjusting Plate Pitch Adjusting Plate
AF-Y/P Jig AF-Y/P Jig AF-Y/P Jig AF-Y/P Jig AF-Y/P Jig
AF Tripod AF Tripod AF Tripod AF Tripod AF Tripod
Attachment-II Attachment-II
Attachment-II Attachment-II
Attachment-II
Tripod Tripod
Tripod Tripod
Tripod
Grip Ring Grip Ring
Grip Ring Grip Ring
Grip Ring
Contact Jig for 2181 Contact Jig for 2181 Contact Jig for 2181 Contact Jig for 2181 Contact Jig for 2181
Contact Jig Cable Contact Jig Cable
Contact Jig Cable Contact Jig Cable
Contact Jig Cable
I/F Box for HIT I/F Box for HIT
I/F Box for HIT I/F Box for HIT
I/F Box for HIT
Setting for EZ check and adj. Setting for EZ check and adj. Setting for EZ check and adj. Setting for EZ check and adj. Setting for EZ check and adj.