Minolta DYNAX 7, Repair Manual

Page: 35 / 66

(2181) 35
REP
AIR GUIDE
■ ■ ■ ■ ■
Fig. 1 Fig. 1
Fig. 1 Fig. 1
Fig. 1
■ ■ ■ ■ ■
Fig. 2 Fig. 2 Fig. 2 Fig. 2 Fig. 2
Viewfinder Back Adjustment
Equipment Required
1000mm Collimator
AE Master Lens
Magnifier
Adjustment
1. Set up the camera as in Fig. 1, so that the chart is at the center of viewfinder.
2. Set Master Lens to infinity.
3. Check that the chart is in focus.
If not, Select one or two VB Washers, and install Washer(s) as in Fig. 2.
In case of front focus: Make VB Washers thinner.
In case of rear focus: Make VB Washers thicker.
Parts No. T= (mm)
A 2181-5045-01 0.05
B 2181-5046-01 0.1
C 2181-5047-01 0.15
D 2181-5048-01 0.2
1000mm Collimator 1000mm Collimator 1000mm Collimator 1000mm Collimator 1000mm Collimator
Master Lens Master Lens Master Lens Master Lens Master Lens
VB WASHER VB WASHER
VB WASHER VB WASHER
VB WASHER
FRESNAL SPRING FRESNAL SPRING FRESNAL SPRING FRESNAL SPRING FRESNAL SPRING
FOCUSING SCREEN FOCUSING SCREEN
FOCUSING SCREEN FOCUSING SCREEN FOCUSING SCREEN
VB WASHER VB WASHER VB WASHER VB WASHER VB WASHER
Magnifier Magnifier Magnifier Magnifier Magnifier