Minolta Dimage RD 3000 Page 118 Instruction Manual Download

Page: 118 / 129

118

CAMERA WARNINGS

MODE

ALL

CArd and the
frame counter
appears.

The compact flash
card is full.

Use one of the
following options to
reclaim space:

• Delete unwanted

images.

• Transfer images to a

PC hard drive, then
Clear or Format the
card.

• Clear or Format the

card.

• Use a new compact

flash card.

• Select a lower

compression ratio.

ALL

CArd appears and
- -
blinks in the frame
counter.

The compact flash
card is not
formatted for this
camera.

Format the compact
flash card using this
camera.

ALL

CArd appears and
Er blinks in the
frame counter.

Card error.

1.Turn the camera off.

2.Remove the compact

flash card.

3.Wait a few minutes,

then reinsert the
compact flash card
and close the card-
chamber cover.

4.Turn the camera on.

• If the icon still

appears, turn the
camera off and
contact a Minolta
Service Facility listed
on the back cover of
this manual.

–

ALL

CArd appears with
no frame counter.

There is no
compact flash card
in the camera.

Insert a compact flash
card into the camera.

DISPLAY

CAUSE

ACTION

PAGE

Summary of Contents for Dimage RD 3000


































































































































Search results

Summary of Contents for Dimage RD 3000

Reviews:

Related manuals for Dimage RD 3000

Brands by name

Popular brands

Minolta Dimage RD 3000, Instruction Manual

Search results

Summary of Contents for Dimage RD 3000

Reviews:

Related manuals for Dimage RD 3000

Brands by name

Popular brands