Minolta Dimage RD 3000 Instruction Manual Download Page 103

Page: 103 / 129

103

ADJUSTING THE LCD MONITOR BRIGHTNESS/CONTRAST

Press the

button to high-

light BRIGHTNESS on the LCD
monitor BRIGHTNESS/CON-
TRAST menu, and press the SET
button.

• The BRIGHTNESS menu will appear.
• Skip this adjustment if brightness is

satisfactory, and go directly to [7].

Press the

button to

adjust the brightness of the
LCD monitor.

• Pressing the

button increases the

brightness of the LCD monitor.
Pressing it once increases by one the
number of

symbols in the right of

the bar.

• Pressing the

button decreases the

brightness of the LCD monitor.
Pressing it once increases by one the
number of

symbols in the left of the

bar.

• Brightness may be adjusted up to

four

or symbols.

Press the SET button when the
desired brightness is reached.

• The system returns to the LCD

monitor BRIGHTNESS/CONTRAST
menu.

Summary of Contents for Dimage RD 3000


































































































































Search results

Summary of Contents for Dimage RD 3000

Reviews:

Minolta Dimage RD 3000, Instruction Manual, Page: 103 / 129

Search results

Summary of Contents for Dimage RD 3000

Reviews: