manualshive.com logo in svg

Minolta CN3101e, User Manual

Share
Download
Minolta CN3101e User Manual Download Page 78

7. Settings and Operations for Scan Functions

69

7.3

Scan to FTP Server

Scan to FTP Server is the function that transmits image data scanned by the copier 
to the FTP server.

1. Using PageScope Light, register the FTP servers (up to five). 

☞

p.70

2. Using PageScope Light, make the setting for One-Touch Key Registration or 

One Time Registration.
The destination, FTP server and URL Notification E-mail Address can be set on 
the One-Touch Key Registration screen, and the destination, FTP server, URL 
Notification E-mail Address, and other scan mode functions can be set on the 
One Time Registration screen. 

☞

p.110

3. On the copier control panel, specify the destination to which the scanned data is 

to be transmitted.
The destination is set by selecting the key, in which One-Touch Key Registration 
or One Time Registration has been made in step 2. 

☞

p.74

4. On the copier control panel, specify the document scan mode.

MEMO
Even if URL Notification has not been set during One-Touch Key Registration or 
One Time Registration on PageScope Light, it is possible to specify the URL 
Notification party from the copier control panel.

☞

p.76

4334O002AA

PC

Scan data

Information

Mail server

FTP server

Mail server

Summary of Contents for CN3101e

















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands