Minolta CF911PE, User Manual

Page: 50 / 60

5-2
T
ro
u
bl
es
h
o
ot
in
g
Cha
p
te
r
5
2. Printer Malfunctions
The printer is malfunctioning.
If these procedures do not correct the problem, contact your Technical Representative.
Printer Condition Check for: Action
Printing cannot be performed
even if data is sent from the
computer. There is some type of
malfunction. Perform the countermeasures
indicated by the messages on the
message display.
Immediately after the main
switch is turned ON, the printer
remains in the warm-up mode. After the main switch is turned
ON, it takes approximately nine
minutes until printing can be
performed. Please wait.
The printer power is not supplied. Check the connection cable and
connection conditions.
Are the printer port and protocol
parameters set correctly in the
network setup? Check the network settings.
Is the printer driver set correctly? Check the name and settings of
the printer driver that is used.
The printer power is not supplied. Is the power cord disconnected
from the wall outlet?
Plug the power cord securely into
the wall outlet.
Is the breaker switched OFF for
the power that is supplied to the
printer? Set the breaker to ON.