manualshive.com logo in svg

Minolta 2330, Instruction Manual, Page: 159 / 160

Share
Download
Minolta 2330 Instruction Manual Download Page 159

159

TECHNICAL DETAILS

Drive Mode

Mode:

Single shot, sequence shot (approx. 1 frame/sec.), self-
timer shot

The recordable number of images:

Full size

Half size

FINE

Approx. 2 frames

Approx. 6 frames

STD. (Standard)

Approx. 4 frames

Approx. 12 frames

ECON. (Economy) Approx. 8 frames

Approx. 12 frames

Self-timer:

Approx. 10 seconds delayed release

Built-in Flash

Charge time:

Approx. 8 seconds at fill flash

Flash modes:

Autoflash, Fill-flash, Flash cancel, Autoflash with red-eye
reduction, Fill-flash with red-eye reduction (Flash cancel in
the close up mode)

Flash intensity control:

Adjusted automatically by an external light

Interface

Video output:

Composite video signal, switchable between NTSC and
PAL

PC interface:

USB port

Power Supply

Batteries:

AA-sized alkaline battery x 4 or AA-sized Ni-MH battery x
4 (AA-sized lithium battery is not available.)

External power:

AC adapter (supplied) available (a DC terminal is provided
on the camera body.)

Operating temperature:

0 to 40°C (32 to 104°F)

Dimensions and Weight

Dimensions (W x H x D) :

116 x 73 x 62 mm (4.57 x 2.87 x 2.44 inches) (not includ-
ing the projecting parts)

Weight:

Approx. 280g (9.88 oz.) (without batteries and the CF card)

Specifications are based on the latest information available at the time of printing
and are subject to change without notice.

Summary of Contents for 2330

































































































































































Reviews:

No comments