Unpacking and setting up
2
2-14
Connecting the power cable
Only use the power cable supplied with the printer.
The laser printer requires a power supply with minimal voltage and frequency fluctuation.
If necessary, ask an electrician for advice.
4
Power supply: 120-127 V at 50-60 Hz / 220-240 V at 50-60 Hz
4
Voltage fluctuation: 120V -10%, 127 V +6% / 220-240 V ±10%
4
Frequency fluctuation: Within 3 Hz
1
Make certain that the printer's power switch is in the
"0" (OFF) position.
2
Insert the plug on the end of the power cable (supplied)
into the power socket of the printer.
3
Insert the other end of the power cable into a power
socket.
CAUTION
Using the wrong power cable may lead to a short circuit situation!
Using power cables of inadequate cross-section can lead to overheating of the cable.
Ü
Only use an extension cable which has a higher rating than the current consumption of the
printer.
Ü
Only use cables with a ground connection.
Ü
Always observe the relevant local regulations regarding the connection of electrical
equipment to the mains network.
Summary of Contents for PagePro 4100
Page 4: ... 4 ...
Page 30: ...2 Unpacking and setting up 2 19 ...
Page 46: ...4 Starting the online manual 4 4 ...
Page 64: ... 18 ...
