Minnich A-1-36, Operators & Service Manual

Page: 11 / 31

11
Dowel Drill Manual
SAFETY DECAL LOCATION
All safety labels on Minnich Manufacturing
units have been carefully placed so they can
be easily seen at all times. There are several
different types of labels on the units. Always
keep these warnings free of dirt, concrete,
or anything else that restricts visibility. Never
remove the labels for any reason. If the label
on your machine become worn or in any way
difficult to read, call our parts department for
replacements.
A
B
C
D
E
HIGH PRESSURE
BLEED AIR PRESSURE
BEFORE SERVICING
DRILLS WILL
AUTOMATICALLY START
WHEN AIR SUPPLY IS LOST
AND REAPPLIED
12287-64
WARNING
DRILLS WILL
AUTOMATICALLY START
WHEN AIR SUPPLY IS LOST
AND REAPPLIED
12287-64
WARNING
WARNING
NOISE MAY
DAMAGE HEARING
WEAR PROPER HEARING
PROTECTION
FLYING PARTICLES MAY CAUSE
EYE INJURIES
WEAR PROPER EYE
PROTECTION
HIGH PRESSURE
KEEP AWAY FROM LEAKS
BLEED DOWN BEFORE REMOVING
LINES TO SERVICE
DUST CAN CAUSE INJURY TO
YOUR HEALTH
IF VENTILATION IS INADEQUATE
USE AN APPROVED RESPIRATOR
12287- 3
WARNING
BE SURE SUPPLY LINES ARE SECURE
DO NOT EXCEED 120 PSI (8.25 BARS)
OR DAMAGE TO MACHINE AND OR
BODILY HARM MAY RESULT
12287-1
12287-62 12287-62
12
28
7-
42
12
28
7-
38
1
12
28
7-
36
12
28
7-
36
12
28
7-
37
12287-43
READ & UNDERSTAND OWNERS MANUAL COMPLETELY.
TIGHTEN ALL LOOSE BOLTS INSPECT ALL LINES, PIPES, AND HOSES FOR DAMAGE.
REPAIR AS NECESSARY.
DRILL STEEL MUST NOT BE BINDING IN GUIDE BEARING. MAKE SURE DRILL STEEL
IS STRAIGHT, FREE OF OBSTRUCTIONS, AND NOT BINDING IN ANYWAY.
FILL THE OILER-PER MANUAL.
WARNING
KEEP GUARDS IN PLACE
DISCONNECT POWER
BEFORE SERVICING
12287-12
INSTALL LOCK
PIN PRIOR TO
TRANSPORTING MACHINE
12287-7
INSTALL LOCK
PIN PRIOR TO
TRANSPORTING MACHINE
12287-7
INSTALL LOCK
PIN PRIOR TO
TRANSPORTING MACHINE
12287-7
INSTALL LOCK
PIN PRIOR TO
TRANSPORTING MACHINE
12287-7
DRILL HAMMERS WILL NOT
FUNCTION WHEN INDICATOR IS RED
WHEN INDICATORS IS RED FILL OIL RESERVOIR
WITH PROPER ROCK DRILL LUBRICANT
GREEN INDICATES LUBRICATOR RESERVOIR IS FULL
Bio-Rock Drill Oil 15W50
TM
Minnich Mfg. Recommended Rock Drill Oil
WARNING
STAND CLEAR
WHEN RAISING OR LOWERING
12287-10
WARNING
STAND CLEAR
WHEN RAISING OR LOWERING
12287-10
F
G H
I
J
K
L
M
12287-62 12287-62
HIGH PRESSURE
BLEED AIR PRESSURE
BEFORE SERVICING
W
ARNING
NOISE M
AY
DAMAGE HEARING
WEAR PROPER HEARING
PROTECTION
FLYING
PA
RTICLES M
AY CAUSE
EYE INJURIES
WEAR PROPER EYE
PROTECTION
HIGH PRESSURE
KEEP
AW
AY FROM LEAKS
BLEED DOWN BEFORE REMOVING
LINES TO SE
RVICE
DUST CAN CAUSE INJU
RY TO
YOUR HEA
LTH
IF VENTIL
ATION IS INADEQU
ATE
USE AN APPROVED RESPIR
ATOR
12
28
7-3
WARNING
BE SURE SUPPLY LINES ARE SECURE
DO NOT EXCEED 120 PSI (8.25 BARS)
OR DAMAGE TO MACHINE AND OR
BODILY HARM MAY RESULT
12287-1
FILL OIL
RESERVOIR
EVERY
TWO HOURS
ATTENTION
HIGH PRESSURE
BLEED AIR PRESSURE
BEFORE SERVICING
PRIOR T
O
OPERA
TION
Read and un
derstand
owners manual completely
.
Tighten all loose bolts, inspect all lines, pipes, and hoses for
damage.
Repair
as necessary
.
Drill steel m
ust not be
binding in guide bearing. Make sur
e
drill steel is
straight,
free of obstructions, and not bind
ing in any
way
.
Fill the oile
r per
manual.
12287-156
A-1-24
A-1-24
Bio-Rock Drill Oil 15W50
TM
Minnich Mfg. Recommended Rock Drill Oil
12287-62 12287-62
HIGH PRESSURE
BLEED AIR PRESSURE
BEFORE SERVICING
W
ARNING
NOISE M
A
Y
DAMAGE HEARING
WEAR PROPER HEARING
PROTECTION
F
LYING
P
A
R
TICLES M
A
Y CAUSE
EYE INJURIES
WEAR PROPER EYE
PROTECTION
HIGH PRESSURE
KEEP
A
W
A
Y FROM LEAKS
BLEED DOWN BEFORE REMOVING
LINES TO SE
R
VICE
DUST CAN CAUSE INJU
R
Y TO
YOUR HEA
LTH
IF VENTIL
A
TION IS INADEQU
A
TE
USE AN APPROVED RESPIR
A
TOR
1
2
2
8
7
-3
WARNING
BE SURE SUPPLY LINES ARE SECURE
DO NOT EXCEED 120 PSI (8.25 BARS)
OR DAMAGE TO MACHINE AND OR
BODILY HARM MAY RESULT
12287-1
FILL OIL
RESERVOIR
EVERY
TWO HOURS
ATTENTION
HIGH PRESSURE
BLEED AIR PRESSURE
BEFORE SERVICING
PRIOR T
O
OPERA
TION
Read and un
derstand
owners manual completely
.
T
ighten all loose bolts,
inspect all lines, pipes, and hoses for
damage.
Repair
as necessary
.
Drill steel m
ust not be
binding in guide bearing. Make sur
e
drill steel is
straight,
fr
ee of obstructions,
and not bind
ing in any
way
.
Fill the oile
r per
manual.
12287-156
A-1-24
A-1-24
Bio-Rock Drill Oil 15W50
TM
Minnich Mfg. Recommended Rock Drill Oil
N
COMPONENTS MAY
BE ENERGIZED EVEN
AFTER BEING UNPLUGGED
Input From Power Source
230 Volt AC
Single Phase
50/60 Hz
15 Amps Minimum
419-903-0010
www.minnich-mfg.com
VOLTS MODEL
CYCLE
PHASE
VPM
M-BOX
180
6000 / 8000 / 10,800
230 AC
3
CAUTION
Hazard of electrical shock, burn or
explosion. Turn off power supplying this
equipment before working on or inside.
Replace cover before re-energizing.
WARNING
If this unit is subjected to an excessive
shock by being dropped or impacted, or if
the enclosure is damaged, it should be
disconnected and not used until it has been
inspected and repaired by a qualified
electrician or personnel.
PRIOR TO OPERATION
Read and understand all safety, operating
and maintenance instructions before using
this product.
O
F
F
6,
00
0
8,000
10,8
00
O
F
F
6,
00
0
8,000
10,8
00