background image

Minn Kota Consumer & Technical Service 
Johnson Outdoors Marine Electronics, Inc. 
PO Box 8129 
Mankato, MN  56001

121 Power Drive 
Mankato, MN 56001 
Phone (800) 227-6433 
Fax (800) 527-4464

minnkotamotors.com

©2018 Johnson Outdoors Marine Electronics, Inc.  

All rights reserved.  

Part #2327130

ECN 39714

Rev G 

12/18

• 60-Amp Circuit Breaker
• Mounting Brackets
• Stabilizer Kits
• Extension Handles

• Battery Connectors
• Battery Boxes
• Quick Connect Plugs

TALON SHALLOW WATER ANCHOR

Introducing the all-new, sleek redesigned Talon. Talon is the only shallow water anchor with up to 15’ of anchoring 
depth, multiple anchoring modes, and control from the bow, transom, console, remote or mobile device.

MINN KOTA ACCESSORIES

We offer a wide variety of trolling motor accessories, including:

UP TO 15’ DEEP

Control more water and catch  
more fish with the first 15’ 
shallow water anchor.

BUILT-IN   

WORK LIGHT

Lets you tie lines and work from 
the transom any time of day — 
or night. Includes both white 
and blue LED lights with three 
brightness settings.

MORE CONTROL 

OPTIONS

•  Control Panel
•  Wireless Remote
•  Mobile App
•  Wireless Foot Switch
• Humminbird

®

 Connectivity

• i-Pilot

®

 &  

i-Pilot Link

TM

 Remote

BLUETOOTH

®

  

CONNECTIVITY

Lets you control Talon from your 
mobile device and easily update 
it. Also opens up communication 
to other control options.

ReCOMMeNDeD aCCessORIes

ON-BOARD & PORTABLE BATTERY CHARGERS

Stop buying new batteries and start taking care of the ones you’ve got. Many chargers can actually damage your 
battery over time – creating shorter run times and shorter overall life. Digitally controlled Minn Kota chargers are 
designed to provide the fastest charge that protect and extend battery life.

MK210D

MK110PD

MK212PC

Summary of Contents for TERROVA































































Reviews: