manualshive.com logo in svg

MINN KOTA Riptide Ulterra, Owner'S Manual, Page: 46 / 48

Share
Download
MINN KOTA Riptide Ulterra Owner'S Manual Download Page 46

TRAnsmITTER mODEL: 2990207 

•   IC:  4397A-ULTERRAIP15

•   FCC ID: T62-ULTERRAIP15

46  |  minnkotamotors.com

©2015 Johnson Outdoors Marine Electronics, Inc.

COmPLIAnCE sTATEmEnTs

fCC COmPLIAnCE

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

1.    This device may not cause harmful interference.

2.    This device must accept any interference that may be received, including interference that may cause undesired operation.

Changes or modifi cations not expressly approved by Johnson Outdoors Marine Electronics, Inc. could void the user’s authority to 
operate this equipment.

This product meets the applicable Industry Canada technical specifi cations.  Operation is subject to the following two conditions: 
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause 
undesired operation of the device.

Note:

 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the 

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a 
particular installation. 

If this equipment does cause harmful interference to radio or television reception, which can be 

determined by turning the equipment off  and on, the user is encouraged to try to correct the interference by one or 
more of the following measures: 

•   Reorient or relocate the receiving antenna. 

•   Increase the separation between the equipment and receiver. 

•   Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected. 

•   Consult the dealer or an experienced radio/TV technician for help.

TRAnsmITTER mODEL: 2990206 

•   IC:  4397A-ULTERRAIP15

•   FCC ID: T62-ULTERRAIP15

TRAnsmITTER mODEL: 2990208 

•   IC:  4397A-ULTERRA20

•   FCC ID:  T62-ULTERRA20

 

Summary of Contents for Riptide Ulterra

















































Reviews:

No comments