background image

DEsCRIPTIOn

KIT ITEm nO.

PART nO.

ITEm nUmbER InCLUDED / QUAnTITY

TILT MOTOR ASSY

178

2997813

128 (1), 129 (1), 130 (1), 131 (1), 132 (1), 133 (1), 134 (1), 135 (1), 136 (1), 137 (1), 138 (1), 139 (1), 140 (1), 141 (1), 142 (1), 
143 (1), 144 (1)

OUTPUT GEAR W/ MAGNETS

2772200

31 (1), 192 (4)

STEERING HOUSING ASSY, 24V

179

2776501

13 (4), 14 (2), 15 (2), 16 (4), 17 (2), 18 (4), 19 (1), 20 (1), 21 (1), 22 (1), 23 (1), 24 (2), 25 (1), 26 (2), 27 (2), 28 (2), 29 (1), 
30 (2), 31 (1), 32 (1), 33 (1), 34 (1), 35 (1), 36 (1), 37 (1), 38 (1), 39 (1), 40 (1), 41 (1), 42 (1), 43 (1), 44 (1), 45 (1), 46 (7), 
47 (4), 48 (2), 49 (1), 50 (3), 51 (2), 52 (1), 53 (1), 54 (1), 55 (1), 56 (2), 57 (2), 58 (2), 59 (1), 61 (1), 62 (1), 63 (1), 192 
(1), 241 (1)

STEERING HOUSING ASSY, 36V

179

2776503

13 (4), 14 (2), 15 (2), 16 (4), 17 (2), 18 (4), 19 (1), 20 (1), 21 (1), 22 (1), 23 (1), 24 (2), 25 (1), 26 (2), 27 (2), 28 (2), 29 (1), 
30 (2), 31 (1), 32 (1), 33 (1), 34 (1), 35 (1), 36 (1), 37 (1), 38 (2), 39 (2), 40 (2), 41 (1), 42 (1), 43 (1), 44 (1), 45 (1), 46 (7), 
47 (4), 48 (2), 49 (1), 50 (3), 51 (2), 52 (1), 53 (1), 54 (1), 55 (1), 56 (2), 57 (2), 58 (2), 59 (1), 61 (1), 62 (1), 63 (1), 192 
(1), 241 (1)

CAM W/ MAGNET AND SPRING PIN

2207901

122 (1), 123 (1), 192 (1)

PLUNGER W/ MAGNET

2203701

119 (1), 192 (1)

MAGNET HOLDER W/ MAGNET

2208601

60 (1), 192 (1)

RELEASE KNOB W/ SCREW

2770100

53 (1), 54 (1), 241 (1)

SENSOR WIRE W/ BUTT CONNECTORS

2880350

MOUNTING BAG

2994917

TRIM HOUSING ASSEMBLY - 54”

244

2997808

5 (2), 50 (1), 64 (1), 65 (1), 66 (1), 67 (1), 68 (1), 69 (1), 70 (1), 71 (1), 72 (1), 73 (1), 74 (2), 75 (1), 76 (1), 77 (1), 78 (1), 79 
(1), 80 (1), 81 (1), 82 (1), 83 (1), 84 (1), 85 (1), 86 (1), 87 (1), 88 (1), 89 (1), 90(1), 91 (1), 92 (1), 93 (1), 94 (1), 95 (1), 96 
(10), 193 (1), 242 (1), 243 (1), 250 (1), 251 (4)

TRIM HOUSING ASSEMBLY - 60”

244

2997804

5 (2), 50 (1), 64 (1), 65 (1), 66 (1), 67 (1), 68 (1), 69 (1), 70 (1), 71 (1), 72 (1), 73 (1), 74 (2), 75 (1), 76 (1), 77 (1), 78 (1), 79 
(1), 80 (1), 81 (1), 82 (1), 83 (1), 84 (1), 85 (1), 86 (1), 87 (1), 88 (1), 89 (1), 90(1), 91 (1), 92 (1), 93 (1), 94 (1), 95 (1), 96 
(10), 193 (1), 242 (1), 243 (1), 250 (1), 251 (4)

TRIM HOUSING ASSEMBLY - 72”

244

2997821

5 (2), 50 (1), 64 (1), 65 (1), 66 (1), 67 (1), 68 (1), 69 (1), 70 (1), 71 (1), 72 (1), 73 (1), 74 (2), 75 (1), 76 (1), 77 (1), 78 (1), 79 
(1), 80 (1), 81 (1), 82 (1), 83 (1), 84 (1), 85 (1), 86 (1), 87 (1), 88 (1), 89 (1), 90(1), 91 (1), 92 (1), 93 (1), 94 (1), 95 (1), 96 
(10), 193 (1), 242 (1), 243 (1), 250 (1), 251 (4)

TRIM HOUSING ASSEMBLY - 54” (EUROPE)

244

2997827

5 (2), 50 (1), 64 (1), 65 (1), 66 (1), 67 (1), 68 (1), 69 (1), 70 (1), 71 (1), 72 (1), 73 (1), 74 (2), 75 (1), 76 (1), 77 (1), 78 (1), 79 
(1), 80 (1), 81 (1), 82 (1), 83 (1), 84 (1), 85 (1), 86 (1), 87 (1), 88 (1), 89 (1), 90(1), 91 (1), 92 (1), 93 (1), 94 (1), 95 (1), 96 
(10), 193 (1), 242 (1), 243 (1), 250 (1), 251 (4)

TRIM HOUSING ASSEMBLY - 60" (EUROPE)

244

2997824

5 (2), 50 (1), 64 (1), 65 (1), 66 (1), 67 (1), 68 (1), 69 (1), 70 (1), 71 (1), 72 (1), 73 (1), 74 (2), 75 (1), 76 (1), 77 (1), 78 (1), 79 
(1), 80 (1), 81 (1), 82 (1), 83 (1), 84 (1), 85 (1), 86 (1), 87 (1), 88 (1), 89 (1), 90(1), 91 (1), 92 (1), 93 (1), 94 (1), 95 (1), 96 
(10), 193 (1), 242 (1), 243 (1), 250 (1), 251 (4)

TRIM HOUSING ASSEMBLY - 72" (EUROPE)

244

2997825

5 (2), 50 (1), 64 (1), 65 (1), 66 (1), 67 (1), 68 (1), 69 (1), 70 (1), 71 (1), 72 (1), 73 (1), 74 (2), 75 (1), 76 (1), 77 (1), 78 (1), 79 
(1), 80 (1), 81 (1), 82 (1), 83 (1), 84 (1), 85 (1), 86 (1), 87 (1), 88 (1), 89 (1), 90(1), 91 (1), 92 (1), 93 (1), 94 (1), 95 (1), 96 
(10), 193 (1), 242 (1), 243 (1), 250 (1), 251 (4)

TILT BRACKET ASSY

245

2774202

50 (1), 51 (1), 112 (4), 113 (1), 114 (2), 115 (1), 116 (1)

sERVICE KITs & AssEmbLIEs

ITEm

QTY

PART nUmbER

DEsCRIPTIOn

239

2

2305402

SHRINK TUBE .374 ID X 2.25" LONG

241*

1

2203407

SCREW, #6-32 X .5

242*

6

3391732

SEALING WASHER

243*

6

3394602

FLAT WASHER #8

244†

1

2997808

TRIM HOUSING ASSEMBLY - 54”

1

2997804

TRIM HOUSING ASSEMBLY - 60”

1

2997821

TRIM HOUSING ASSEMBLY - 72”

1

2997828

TRIM HOUSING ASSEMBLY - 54” (EUROPE)

ITEm

QTY

PART nUmbER

DEsCRIPTIOn

1

2997824

TRIM HOUSING ASSEMBLY - 60” (EUROPE)

1

2997825

TRIM HOUSING ASSEMBLY - 72” (EUROPE)

245†

1

2774201

TILT BRACKET ASSEMBLY

246

1

2373487

SCREW-#8-32 X 3/4

249

4

2263453

SCREW, 1/4-20x1" SHCS S/S

250

1

2201915

DRIVE BLOCK BRACKET

251

4

2373440

SCREW-#4-24 X 1/4" PHCR SS

*Item is part of an assembly and is listed for reference only. Item cannot be ordered seperately. Refer to “Service Kits” section for kit part number.
†This assembly includes multiple parts. Refer to “Service Kits” section for complete part listing. 

RIPTIDE ULTERRA 

80/112 LBS THRUST  -  24/36 VOLT  -  54”/60”/72” SHAFT

44  |  minnkotamotors.com

©2015 Johnson Outdoors Marine Electronics, Inc.

PARTs LIsT

Summary of Contents for Riptide Ulterra

















































Reviews: